SAVE YOUR FLOOR,
BEAT THE MOISTURE!
THE MOST EFFICIENT SYSTEM ON THE MARKET!
Long drying times on wet subfloors and the associated delays quickly become a problematic, especially on urgent jobsites.
HYTEC E736 TURBO is an ultra-rapid two-component moisture barrier specially adapted to block rising damp on cement-based subfloors with no limit on moisture level.
MAIN BENEFITS:
- Very fast setting
RAPID CURING: 4h
- High technical performance
NO LIMIT on moisture level
-
LOW CONSUMPTION
One coat application: 500-600g/m²
2 POSSIBLE CASES TO FORM A MOISTURE BARRIER
1. DAMP PROOF MEMBRANE
Natural rising damp through a concrete slab
Main Causes:
- New or renovation subfloors exposed to rising damp
- Building located in a flood zone
- Hydrostatic pressure dur to poor drainage of rainwater (proximity to water table)
HYTEC E736 TURBO
- Apply with a spatula TKB-B2
- Coverage: 500-600g/m²
2. RESIDUAL MOISTURE
The amount of water remaining in the subfloor before the complete drying of a cement screed or concrete floor
Main causes:
- Indufficient drying time
- High humidity
- Lack of aeration/ ventilation
- Water infiltration
HYTEC E736 TURBO
- Apply with a spatula TKB-B1
- Coverage: 300-400g/m²
4 steps for a perfect preparation of your subfloor!
- STEP 1: Pour all the resin into the hardener and mix thoroughly until a homogeneous mixture is obtained.
- STEP 2: Apply the two-component epoxy resin with a spatula TKB-B2 (500-600g/m²).
- STEP 3: After the application, use a spiked roller over the entire surface to avoid any risk of air bubbles. Allow to dry for approximately 4h at 20ºC.
- STEP 4: Apply GRIP A936 XPRESS sanded primer with a short hair roller (100-120 g/m²). Allow a drying time of 2 hours before applying the self-levelling compound.
DAILY FULL SYSTEM!
Bostik offers a high performance system with HYTEC E736 TURBO moisture barrier and the associated GRIP A936 XPRESS fast drying sanded primer.For a perfect finish, use SL C980 XPS to obtain an excellent mechanical resistance which can be covered with a coating to be left as the final coating. Ideal solution for commercial and industrial floors.
GET YOUR FREE TRAINING!
Bostik ACADEMY is a knowledge center carefully created for professionals in the construction market.
At Bostik ACADEMY you will experience a tailored training program that is perfectly matched to your needs.
Our highly skilled Technical Team will present our product portfolio, best application methodes, and key industry recommendations. In addition, we are also able to offer tailored dedicated trainings to you and your team.