SL C730 FIBRE

CHARACTERISTICS

• Color : grey
• Working time : 20min
• Walk on time : 4-6h
• Coverage : 1,5 kg/mm/ m²
• Curing time :
  • Tiling : 24h
  • PVC, linoleum, rubber : 48-72h
  • Wood floor : 48-72h

BENEFITS

• Specifically for renovation on wooden subfloors
• Flawless finish with no shrinkage
• Compatible with all heated floors

APPLICATION

Measure 6 liters of clean, cold water into a clean mixing bucket. Gradually add the bag of Bostik SL C730 FIBRE to the water, whilst continually mixing with an electric drill and mixing paddle until a smooth lump-free mixture is obtained. This will normally be achieved after 2 minutes. The mixture will retain its self-smoothing capability for approximately 20 minutes under normal conditions. Pour the mixed material onto the prepared substrate to a thickness between 1mm and 10mm. Using a smooth edge stainless steel trowel, smooth over the wet product to gain the desired thickness and smoothness. A pin level may be used to assist in gaining the required depth. Use a spiked roller to remove any trapped air and flow lines, to give a uniform surface appearance.