SL C990 SPRINTER​​​​​​​​​​​​

CHARACTERISTICS

• Color : grey
• Working time : 20min
• Walk on time : 45 min
• Curing time : 
• Carpet and tiling : 90min - 2h
• PVC : 90min - 4h
• Parquet, linoleum, rubber : 12h
• Coverage : 1,6 kg/mm/ m²

BENEFITS

• Foot traffic : 45min
• Floors can be covered from 90min
• Very high mechanical resistance

APPLICATION

Measure 6 liters of clean, cold water into a clean mixing bucket. Gradually add the bag of Bostik SL C990 SPRINTER to the water, whilst continually mixing with an electric drill and mixing paddle until a smooth lump-free mixture is obtained. This will normally be achieved after 2 minutes. The mixture will retain its self-smoothing capability for approximately 20 minutes under normal conditions. Pour the mixed material onto the prepared substrate to a thickness between 1mm and 10mm. Using a smooth edge stainless steel trowel, smooth over the wet product to gain the desired thickness and smoothness. A pin level may be used to assist in gaining the required depth. Use a spiked roller to remove any trapped air and flow lines, to give a uniform surface appearance.